Does Meraki MR support Dynamic WEP?

SOLVED
CHGR
Comes here often

Does Meraki MR support Dynamic WEP?

There was no mention of Dynamic WEP as an authentication in the Meraki's document.

Is it applicable in Meraki MR?

If so, could someone let me know how to configure it.

 

1 ACCEPTED SOLUTION
nwu1
Here to help

Hi CHGR,

 

I don't believe that the MR's support dynamic WEP as it's a very specific protocol. I would recommend opening up a support case and see if they're able to allow that configuration, otherwise it would be a feature request.

 

Cheers,

nwu1

View solution in original post

6 REPLIES 6
nwu1
Here to help

Hi CHGR,

 

I don't believe that the MR's support dynamic WEP as it's a very specific protocol. I would recommend opening up a support case and see if they're able to allow that configuration, otherwise it would be a feature request.

 

Cheers,

nwu1

CHGR
Comes here often

Hi, nwu1,

 

Thank you very much for your advice.

I opened a case in dashboad and got reply from Meraki support team.

They said Meraki doesn't support dynamic WEP as you mentioned.

All what I can do now is just using  "make a wish".

 

Cheers,

CHGR

PhilipDAth
Kind of a big deal
Kind of a big deal

No one should be using WEP anymore.   Use WPA2 Enterprise mode instead. 

CHGR
Comes here often

I totally agree with you.

This is not my WLAN but someone another.

Most vendors stopped providing support for WEP as it was cracked YEARS ago. Its a very insecure method of authentication. 

Thank you for your comment.
Yes, It is. Now, we omited dynamic WEP among our options.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels