Clarity on Airmarshal's offline behavior

SOLVED
Samrai
Conversationalist

Clarity on Airmarshal's offline behavior

Do Airmarshal APs continue to detect/prevent Rogue APs, hotspots, honeypot, and other intrusions under WIPS, when the connection to the cloud controller is lost?

It seems the RF optimization-based decisions are taken in the cloud, not sure if it's the same for WIPS as well.

I found the below doc, which says "the rogue AP list will not get Updated", does that mean rogue APs don't get detected and prevented in offline mode ?.

https://documentation.meraki.com/zGeneral_Administration/Cross-Platform_Content/Behavior_during_Conn...

 

Looking forward to some clarity on this, Thanks

1 ACCEPTED SOLUTION
Omkar_Manjrekar
Meraki Employee
Meraki Employee

@Samrai 

 

Yes, that’s correct. Since the AP does not have connectivity to the dashboard, the AP won’t be able to update the dashboard about new rogues.
Since the dashboard is the one that decides when to contain or not, it has no way to know about new rogues nor to send the instruction to contain anything.
 
Regards,
Meraki Team
 

View solution in original post

1 REPLY 1
Omkar_Manjrekar
Meraki Employee
Meraki Employee

@Samrai 

 

Yes, that’s correct. Since the AP does not have connectivity to the dashboard, the AP won’t be able to update the dashboard about new rogues.
Since the dashboard is the one that decides when to contain or not, it has no way to know about new rogues nor to send the instruction to contain anything.
 
Regards,
Meraki Team
 
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels