Cisco ISE hotspot integration with Meraki AP

AhmedGadi
New here

Cisco ISE hotspot integration with Meraki AP

Hi All,

          We are in process of integration of Meraki access points with Cisco ISE 2.4 and utiliza hotspot feature of ISE for our guest open SSID configured on Meraki AP.

I have found few documents from Cisco as well as Meraki, but could not accomplish my task.

Look forward to seea positive response from experts.

 

3 Replies 3
BrechtSchamp
Kind of a big deal
redsector
Head in the Cloud

We have got ISE for our wireless.

This is the SSID for Active-Directory Users, the ISE decides if the device has an certificate or not.

If certificate is ok: user has internal access

if no certificate: the user gets an Internet access only f.e. for his mobile devices, cell phones, iPads and so on.

 

It´s a two factor check: Active-Directory account + certificate on the device. And a easy to use with only one SSID for the employees. Guests have an own SSID.

 

Meraki SSID config:

Bildschirmfoto 2019-04-02 um 14.10.33.png

 

Bildschirmfoto 2019-04-02 um 14.12.57.png

 

You need to set up the rules on the ISE correctly.

And this is important:

 

You need to put in every Accesspoint with it´s IP-Address as allowed network address:

 

Bildschirmfoto 2019-04-02 um 14.16.55.png

 

Cmiller
Building a reputation

Thanks for this info, Might be a project in the near future for me
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels