cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

C4W configuration

Highlighted
New here

C4W configuration

Hi everyone,
I ask your support for a problem that sad me.
I have configured the MR70 parameters as written in the Meraki documentation but the splash page doesn't appear.
I have already put the C4W server IP in the walled garden and inserted the external splash pahe URL but the situation doesn't change.
Anyone know how to help me?
Thanks

3 REPLIES 3
Highlighted
Here to help

Re: C4W configuration

Ok, it sounds like you are wanting to configure your AP for a 3rd party RADIUS provider. I have never heard of C4W but should be the same.

 

There are two spots to that you have to do this:

 

  1. Wireless-->Configure--> Access control this is where you establish your RADIUS credentials /Walled Garden etc. on a per SSID basis.If you have done thi properly you will see an OK for your RADIUS server

RADIUS.png

 

     2. Wireless-->Configure-->Splash Page. Again, set on a per SSID basis.

 

Splash.png

Highlighted
Kind of a big deal

Re: C4W configuration

Could you post a web link to the product you are using?

Highlighted
Conversationalist

Re: C4W configuration

Hello Mark


First Step :


be sure that your VLAN Guest is propagated proprely on all interco ports + AP ports (if any)


Second step :


Create your Guest SSID

Association requirements: Open

Splash page Sign-on with : My RADIUS Server

RADIUS for splash page : Put C4W Radius Servers (1812 Port Auth and 1813 for Accounting)

configure walled garden

Addressing and traffic : Bridge mode + TAG the vlan ID (if any)


then


go to Wireless => Splash Page :

Custom Splash URL : Or provide a URL where users will be redirected : put your C4W Splashportal URL

Splash Behavior A different URL : put your C4W Splashportal URL

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.