Broadcast suppression

ZOOR
Here to help

Broadcast suppression

Any way to turn off broadcast suppression, even if it's temporary?

5 REPLIES 5
NolanHerring
Kind of a big deal

This might be of some use:

https://documentation.meraki.com/MR/Other_Topics/Multicast-Unicast_Conversion

Its under the General settings
Nolan Herring | nolanwifi.com
TwitterLinkedIn
PhilipDAth
Kind of a big deal
Kind of a big deal

Unless you have "Storm Control" configured under Switch/Switch Settings - the MS wont be doing any broadcast suppression.  If you do - remove the config for your test.

This is related to MRs not MSs

PhilipDAth
Kind of a big deal
Kind of a big deal

Oops, my mistake.  Didn't spot that.

Pulkit_Mittal
Getting noticed

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels