Bridge Mode Basics.

SOLVED
Mirrwood
Conversationalist

Bridge Mode Basics.

Just looking into setting up a Bridged mode SSID for the smart devices which need to communicate directly.

 

Is a basic setup as below?

 

Create an SSID in bridged mode with WPA2 etc with new VLAN 10.

Create new VLAN 10 on MX appliance with associated IP range

Ensure VLAN10 is running a DHCP server

L3 outbound firewall rules are any/any.

 

 

1 ACCEPTED SOLUTION

That should be absolutely fine with the setup you mentioned initially.

 

🤙

 

 

View solution in original post

4 REPLIES 4
Bettencourt
Meraki Employee
Meraki Employee

That is indeed a basic setup and works.

 

When you say the devices need to communicate directly, what do you mean exactly, with one another?

 

👍

Yep, i.e. smartphone to smart t.v etc to stream content etc.

 

That should be absolutely fine with the setup you mentioned initially.

 

🤙

 

 

Thank you.

 

Will give it a try tonight

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels