cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Bandwidth Shaping for a single user.

SOLVED
New here

Bandwidth Shaping for a single user.

Hello All,

 

I have a user that is using a lots off bandwidth. I would like to have the ip or device to only use small bandwidth for a session. I am using MR 25.12 

 

Any tips is greatly appreciated .

 

Thanks

BigK

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Kind of a big deal

Re: Bandwidth Shaping for a single user.

Create a group-policy and limit the bandwidth settings on it to whatever you want. Then apply the group-policy to that user.

https://documentation.meraki.com/zGeneral_Administration/Cross-Platform_Content/Creating_and_Applyin...
Nolan Herring | nolanwifi.com
TwitterLinkedIn

View solution in original post

4 REPLIES 4
Highlighted
Kind of a big deal

Re: Bandwidth Shaping for a single user.

Create a group-policy and limit the bandwidth settings on it to whatever you want. Then apply the group-policy to that user.

https://documentation.meraki.com/zGeneral_Administration/Cross-Platform_Content/Creating_and_Applyin...
Nolan Herring | nolanwifi.com
TwitterLinkedIn

View solution in original post

New here

Re: Bandwidth Shaping for a single user.

Thanks Nolan, 

 

I will try that.

 

BigK

Kind of a big deal

Re: Bandwidth Shaping for a single user.

Hey @BigK , I would solve this by creating a Group Policy with the BW settings I wanted to apply, and then apply the GP directly onto the client via the clients page. 

New here

Re: Bandwidth Shaping for a single user.

@jdsilva Thank you!!!

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.