AP Clean Air Technology

Ashraf
New here

AP Clean Air Technology

Does Meraki AP have clean air tecnology? If have then need some document....

What about coverage are size for MR42?

3 REPLIES 3
MilesMeraki
Head in the Cloud

Hello @Ashraf,

 

Meraki AP's come with "Air Marshall" which utilises the extra scanning radio within Meraki AP's to scan for any wireless security threats within your wireless network. Please refer to the following article for more information - https://documentation.meraki.com/MR/Monitoring_and_Reporting/Air_Marshal.

 

Regarding the coverage provided by MR34's please refer to the MR34 datasheet which outlines the RF performance characteristics - https://meraki.cisco.com/lib/pdf/meraki_datasheet_MR34.pdf

Eliot F | Simplifying IT with Cloud Solutions
Found this helpful? Give me some Kudos! (click on the little up-arrow below)

Air Marshall is the same as the Rouge detector in AireOS technology. So we can assume that from the datasheet specifications, the Meraki APs do not support clean air.

 

In this link, you can read about the clean air technology:

 

https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration-guide/b_cg75/b_cg75_chap...

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
thomasthomsen
Head in the Cloud

The real question is. What "chip" does the RF analysis on the new 916x APs.

They all have the CleanAIR Pro "chip/board" inside of them, because of the common hardware.

But is Air Marshal and / or RF Spectrum using this chip ? or just the client facing normal Wifi chip ?

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels