AIR-PWRINJ30= and MR34

Solved
Grishazahid
Conversationalist

AIR-PWRINJ30= and MR34

Hello community!

I have Cisco Aironet AIR-PWRINJ30=. Is it safe to use this power injector with MR34 acces point?

I didn't find any documentation for this case, so decided to ask here.

1 Accepted Solution
Grishazahid
Conversationalist

I decided not to use this injector. Point was succesfully connected to new Meraki Power injector

Thanks all for replies

View solution in original post

4 Replies 4
antonis_sp
Building a reputation

You should be fine. PoE is a universal standard.
SoCalRacer
Kind of a big deal
MerakiGeoff
Meraki Employee
Meraki Employee

Hi there,

 

It looks like that PoE injector is 802.3at capable according to the Cisco website: https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-antennas-accessories/eos-eol-noti.... The MR34 requires 802.3at PoE+ to fully work, so this one will be fine to use with it.

If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.
Grishazahid
Conversationalist

I decided not to use this injector. Point was succesfully connected to new Meraki Power injector

Thanks all for replies

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels