802.1x radius timeout

SOLVED
claudiob
Conversationalist

802.1x radius timeout

Hi everyone, sometimes I find the log 802.1x radius timeout.

The Access point are in Wi-Fi organization,  the switch in lan organization and Sdwan in another organization.

The SSID that I use with 802.1x works 5ghz only.

I checked the username and password with radius test and it's all ok.

Nobady said me that there is a problem, but I found strange this log, It's a first time that I see this log.

There is someone that help me?

Thanks a lot

CB

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

That would usually mean the AP didn't get a response from the radius server in time.

View solution in original post

2 REPLIES 2
PhilipDAth
Kind of a big deal
Kind of a big deal

That would usually mean the AP didn't get a response from the radius server in time.

thanks a lot Philip!

I found it !, There was a wrong configuration on radius server from AP.

Now it's all ok

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels