cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

VLANs

Highlighted
Getting noticed

VLANs

Hi all,

 

I'm in need of help understanding and setting up VLANs on my network.

 

I currently have an MX68 Security & SD-WAN appliance, an MS120-8LP switch, and an MR33 access point.

 

I find myself getting confused regarding VLANs. 😭

 

Could someone please guide me with this, please? 🙏🏽 I'd appreciate it very much!!

1 REPLY 1
Highlighted
Head in the Cloud

Re: VLANs

Hi @Shadius , firstly, have a read through this document 

 

https://documentation.meraki.com/MX/Networks_and_Routing/MX_Addressing_and_VLANs

 

Let’s say you want to configure a Voice and Data VLAN on your network.  With your setup I would configure the VLAN interfaces on the Mx.  So you would have something like:

 

Voice VLAN (VLan iD 10) Subnet 192.168.10.0/24, MX IP 192.168.10.1

 

Data VLAN (VLAN ID 20) Subnet 192.168.20.0/24, MX IP 192.168.20.1

 

Connect your MX to your switch via a Trunk and allow both VLANs.

 

on your switch allow the VLANs required on a per port basis

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.