MS350 Cable Test results with Cisco Phone

Dragon
Here to help

MS350 Cable Test results with Cisco Phone

We're new to the Meraki Switch and we did a cable test on an MS350 and received these results and I'm wondering if some can explain this to me. The phone does work but I don't understand the Pair 3 results.

image.png

3 REPLIES 3
BrandonS
Kind of a big deal

I wouldn't give too much weight to the cable tests from the switches.  They are a good starting point, but I have seen questionable or incorrect results compared to a real cable tester (i.e. Fluke).

- Ex community all-star (⌐⊙_⊙)
BrandonS
Kind of a big deal

I can't see your screenshot, BTW.  It is also possible that there is a real cable error and a phone could still work.

- Ex community all-star (⌐⊙_⊙)
PhilipDAth
Kind of a big deal
Kind of a big deal

I don't see the screenshot either.

 

My guess, the phone has a 100Mb/s port.  Only 2 of the 4 pairs are used - so you may well have a cable issue and the phone will still work.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels