Cisco Meraki MS-120 Switch

[Vaishkhan]

Hi Everyone,

I have two VLAN 410(Core) and 490(Untrusted) in same switch. there is one Access point connected in vlan 490 and acquired IP 192.168.90.3 from DHCP.

I am able to ping AP ip from 410 vlan but on browser not able to access on port 80. but when I connect any laptop or PC in 490 vlan, AP gets access on browser.

Allowed rules on firewall: 

     

Please Guide.

Thanks.

[cmr]

@Vaishkhanan MS120 isn't a layer3 (routing) switch, it is layer2 only.  It needs a layer 3 device to pass the VLANs to where they can then be routed to each other.