Bug Report: MQTT failure on MV72 camera

BobaTeaGood
Getting noticed

Bug Report: MQTT failure on MV72 camera

## Bug Report
MQTT failure on MV72 camera

- Serial Q2JV-P8WQ-6MHP
- Firmware MV 4.8 (up to date)

The camera was started at 2020-11-03T16:00 UTC. Logs are collected from 2020-11-03T16:32 UTC to 2020-11-04T07:08 UTC.
- The camera is publishing messages to `/merakimv/Q2JV-P8WQ-6MHP/light` during the entire period.
- The camera is publishing messages to `/merakimv/Q2JV-P8WQ-6MHP/raw_detections` and then **stops** at 2020-11-04T06:20 UTC.

The only way to get the camera to publish again on the raw_detections topic is to do a restart.

 

### Expected behavior
The camera reliably publishes messages to /merakimv/Q2JV-P8WQ-6MHP/raw_detections when MVSense is turned on.

3 REPLIES 3
PhilipDAth
Kind of a big deal

You'll need to open a support case.  That is a bug.

How do we go about opening a Support Case?  

Never mind!  Got it.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.