meraki core switch pointing to firewall with unknown sources

Sadamali
Comes here often

meraki core switch pointing to firewall with unknown sources

meraki core switch pointing to firewall with unknown sources

 

Core switch is MS425

Firewall MX250

 

Port configuration is trunk native vlan 1 and allowed vlan all.

 

Suggestions are much appreciated.

6 REPLIES 6
KarstenI
Kind of a big deal
Kind of a big deal

Can you explain in a little more detail what the problem is?

Sadamali_0-1623325490465.png

Thanks for your reply.

Can you see the picture arrow mark. Actually the MS425 and MX250 is connected directly. but in topology it shows unknown pointing device.

KarstenI
Kind of a big deal
Kind of a big deal

Is there anything visible when you hoover the mouse over that element?

When i move my mouse cursor pop up came but no information.

any one can help on this?

Bruce
Kind of a big deal

@Sadamali unfortunately there is not much we can help with here.

 

The topology is built with CDP and LLDP information that is gathered by the devices and then intelligently interpreted. It appears that sometimes this isn’t too intelligent and it fails, especially where there are dual uplinks from a switch or switch stack, or a pair of MXs involved.

 

If it’s not causing any problems, i.e. it’s just cosmetic, then don’t worry about it. If you do want to worry about it then the best I can say is to contact support and see if they can let you know what it occurring, and if there is a fix.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels