how to Isolate a MX site in the network

Syed12
New here

how to Isolate a MX site in the network

Hi,

 

I have a scenario where I will be required to isolate one of the Meraki sites immediately. It will be easier if its a stand alone device but how to isolate one of the networks/site from the SDWAN network if we are using templates?

 

Thanks

2 REPLIES 2
UCcert
Kind of a big deal

I’m not familiar with working with templates but couldn’t you pull the site out of the sd-wan by removing the local VLANs out of the tunnel.

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
PhilipDAth
Kind of a big deal

Create a VPN firewall blocking traffic to and from their subnets.

https://documentation.meraki.com/MX/Site-to-site_VPN/Site-to-site_VPN_Firewall_Rule_Behavior 

 

Option 2, have them turn their MX off.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels