cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

What will happen to the Non-MerakiVPN if we change the VPN option Hub to Spoke

Highlighted
New here

What will happen to the Non-MerakiVPN if we change the VPN option Hub to Spoke

Hello,

We have a MX that have been configured as a Hub, in the VPN site To Site Configuration.

Then we have a Non-Meraki site to site VPN configured on this same MX.

We plan to change this MX as a Spoke, but the MX is live currently.

 

Question: If we change the config to Spoke, does the Non-Meraki VPN will disapear? Should we reconfigure the Non-Meraki Site-to-Site VPN?

 

Regards,

Antra

1 REPLY 1
Highlighted
Meraki Employee

Re: What will happen to the Non-MerakiVPN if we change the VPN option Hub to Spoke

Hello @AAntra,

 

Non-Meraki VPN configurations will not disappear if you change your MX from a hub to spoke.

 

That being said, non-Meraki VPN configurations are organization-wide, so as long as the MX network has VPN enabled and is in-scope (per their peer availability configuration), the MX will try to establish those Non-Meraki VPN tunnels.

If this was helpful, click the Kudos button below.
Please mark it as a solution if solved your issue so others can benefit from it 🙂
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.