VOIP Registration timing out where to begin

benny
Getting noticed

VOIP Registration timing out where to begin

Hi All, 

 

I have a handful of single Polycom handsets hanging off Z1's and Z3's nailing up a AutoVPN tunnel back to our DC.

 

The Polycom handsets are registered back to the Broadsoft VSP with the routes accessible only through the VPN tunnel. I believe the advertised routes are all correct.

Voice, Video and registrations all work as expected, with the exception of some sites whereby registration fails to renew causing the handset to become unavailable to incoming calls. Outgoing calls from the handset out are never a problem. 

 

Where do I begin to troubleshoot this issue? Anyone have experience or ideas on what I can check or troubleshoot?

 

Thanks,

Ben

 

 

5 REPLIES 5
PhilipDAth
Kind of a big deal
Kind of a big deal

What does the log on the phone say - for the reason that the registration is failing?

Hi Philip, 

 

Handset logs show nothing obvious in logs. 

 

Would it be the session border controller timing out and clearing the registration? 

PhilipDAth
Kind of a big deal
Kind of a big deal

Anything interesting in the SBC log?

 

Can you leave a long running packet capture going on the SBC?

I thought you may ask that next 😉

 

Unfortunately no, I do not have access to the SBC logs easily enough. 

 

I could raise a ticket with our VSP, would that be worth going down that road? 

 

 

PhilipDAth
Kind of a big deal
Kind of a big deal

I would at least ask them what they see is happening.

 

I would see if you can do a packet capture, somehow, of the problem happening.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels