Traffic Uploading limited by Meraki

SupportH
New here

Traffic Uploading limited by Meraki

We have 2 WAN from different ISP on mode load-balancing. Each wan have 100/100 symmetric. 

Doing Banwith test connected to Meraki we  have 120-150 (down, ok) and 30 (up) and all tests.

 

I tried to test directly connected from each router and is working fine. And tried too connected since a pc to our layer3 not passing by meraki, and works fine too.

 

¿Why Meraki is blocking or limiting traffic?

4 REPLIES 4
Brash
Kind of a big deal
Kind of a big deal

Are you using any bandwidth shaping (global or per client)?

What models of Meraki devices are you using and what firmware are they running?

SupportH
New here

We are not using any bandwith shaping and we have MX67 y MX84, all firmware are on 16.16.4

PhilipDAth
Kind of a big deal
Kind of a big deal

Are you currently a stable firmware release or better?

PhilipDAth
Kind of a big deal
Kind of a big deal

You could also test turning off IPS/AMP for a little bit and seeing if that is impacting the test.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels