MX 84 Active Standby to GCP VPN pairs

JED2021
Getting noticed

MX 84 Active Standby to GCP VPN pairs

I have 2 ISP connections

I have a VPN setup to one of the 2 VPN endpoints at GCP.  The corporate network can reach the subnet(s) inside the GCP endpoint.

1 endpoint negotiates phase 1 and phase 2 on ISP1 to GCP Endpoint 1

 

What is the process or concern to bring up the second tunnel on ISP 2 to GCP endpoint 2

 

                           CORPORATE LAN

                                       |

                                       |

  Meraki MX 84 ( Primary/Standby)

 

  ISP 1 (ip address)                     ISP 2 ( (ip address)

              |                                                  |

              |                                                  |

     GCP endpoint 1                            GCP endpoint 2

                                           |

                                           |

                                  GCP Ips

                                  192.168.128.0/24
                                  172.31.3.0/24

     

0 REPLIES 0
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels