IS vpn translation possible with MX in vpn concentrator Mode?

LBRO
Conversationalist

IS vpn translation possible with MX in vpn concentrator Mode?

Customer utilizes vpn translation with their Cisco asa 5510 to about 10 of their clients as the customers' internal ip range overlaps with their clients. Can we set up a 2nd MX as VPN concentrator and do something similar? I believe I have seen a document on this but I can't put my hands on it.

5 REPLIES 5
jdsilva
Kind of a big deal

You mean like this?

 

https://documentation.meraki.com/MX/Site-to-site_VPN/Using_Site-to-site_VPN_Translation

 

Yup, it's supported in concentrator mode. It's just non-Meraki VPN it's not supported in.

LBRO
Conversationalist

Unfortunately, they are all non Meraki vpn peers.

jdsilva
Kind of a big deal

😞

image.png

 

Are you able to do the translations on the non-Meraki end?

LBRO
Conversationalist

Not sure what the status of that would be, but I would say probably not.

Nash
Kind of a big deal

I know it's a pain but I'd recommend checking in with your remote peers to see if they can do it. Otherwise, sadly, you're going to be out of luck.

 

VPN NAT for third-party VPNs is on my wishlist.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels