Details about configuring meraki67w to network

Sandeepa
New here

Details about configuring meraki67w to network

Hi,

when we trying to configure meraki in between router and my office switch internet is not wroking on servers(we have adds & dhcp) and client computers, is there any diagrams i can refer?

2 REPLIES 2
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @Sandeepa, firstly hello and welcome.

 

Is the MX registered out to the Meraki cloud?

 

I’m going to make some assumptions here but I assume that you’ve configured your VLANs and ip subnets on the MX? You have a trunk port configure on the MX which is connect to a trunk port on the switch?  On the switch you have configured the ports in their respective VLANs?

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
DarrenOC
Kind of a big deal
Kind of a big deal

See also setup guide

https://documentation.meraki.com/MX/Installation_Guides/MX67%2F%2FMX68_Installation_Guide
Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels