Content Filtering on MS320 behind an MX100

Housekeeping
Conversationalist

Content Filtering on MS320 behind an MX100

I'm needing to apply content filtering on a VLAN defined by a MS320 that is behind a MX100. The MX is configured to track by IP. This results in my ability to define group policies reside in a different network than the VLAN.

 

Any suggestions how I work around this?

3 REPLIES 3
PhilipDAth
Kind of a big deal
Kind of a big deal

Alas you wont be able to do this.  The VLAN would need to terminate directly on the MX100.

I've moved the VLAN to the mx and setup dhcp accordingly. I should note this vlan is for a tagged wifi on the same network as the MS320. Perhaps I should consider moving the AP to the same network as the MX?

omfg, there is shaping on the APs

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels