Connecting to Multiple site - site VPN in Auto vpn

Prakash_blr · ‎07-01-2022

One of our MX64 connects to two sites. i did reset and removed from template and rebind. restarted

Please help in clearing this issue

DarrenOC · ‎07-01-2022

What do you have configured under Security & SD-WAN > Configure > Site to site VPN

If set to Mesh (like below) then toggle to Spoke and select your designated Hub.

Mesh (as the name indicates) builds a VPN with all Hubs and Spokes

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

Prakash_blr · ‎10-19-2022

We have more than 50 mx64 but only this mx64 is not connecting through. we have templates and each have auto cpn to our dc mx64

Prakash_blr · ‎10-19-2022

HI, Is there any way to get logs from meraki dashboard to check this issue