Issue adding an MV camera to existing network that is bound to Template

Chris_McGuire
New here

Issue adding an MV camera to existing network that is bound to Template

Can you add a Camera to an existing network that is bound to a Template.  I am getting the following message.

"A bound combined network may only contain bound networks"

2 REPLIES 2
PhilipDAth
Kind of a big deal
Kind of a big deal

I recall having this issue once before with adding an MR to a bound network.  It was bizarre, because I was adding MR's to many of the networks, and just one of them had this issue.

 

In my case support got me to unbind the network, add the MR, and then rebind it.  This solved my problem.

 

Make a note of the IP configuration (if using unique address) before doing this, as you'll need to reinstate this afterwards.

jdsilva
Kind of a big deal

MV's don't support template binding... I wonder if that's why?

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.