Question: is there any way to allow local traffic routing while connected to Z1 VPN

bxdobs
Here to help

Question: is there any way to allow local traffic routing while connected to Z1 VPN

VPN Client software like Big-IP Edge Client VPN have settings that allow both Local and VPN network traffic ... recently noticed that while connected to a Meraki Z1 VPN, my Local network traffic appears to be cut off  (my local Gateway Router is inaccessible while connected to the Z1 VPN) ... is there some setting either on the Z1 dashboard or in the Client Software to allow local network traffic while connected? I am using the Win 7 Pro 64 generic Windows Network Connections to connect to a Z1 VPN

2 REPLIES 2
PhilipDAth
Kind of a big deal
Kind of a big deal

Heres a Meraki Document which outlines how to setup and is easier to follow than the above; https://documentation.meraki.com/MX-Z/Client_VPN/Configuring_Split-tunnel_Client_VPN. 

Eliot F | Simplifying IT with Cloud Solutions
Found this helpful? Give me some Kudos! (click on the little up-arrow below)
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.