Below are the most important changes to our documentation between January 26th and February 9th:
NetFlow Overview
Change: Clarified firmware version requirements.
Resetting Cisco Meraki Devices to Factory Defaults
Change: Clarified that MX will also clear static IP addressing during a reset.
MR86 Installation Guide
Change: Added dimensionally measurements for bracket install.
MX Access Policies (802.1X)
Change: Updated firmware requirements.
BGP
Change: Updated firmware recommendations.
MX and Z-Series Wireless Settings
Change: Added link to AutoRF document.
Meraki and Cisco Cloud Calling Connected Branch Solution
Change: Added Meraki Insight, MX Sizing Guide sections.
Wi-Fi 6 (802.11ax) Technical Guide
Change: New article.
Using the Cisco Meraki Device Local Status Page
Change: Updated device support.
Best Practices for Merging Networks and Organizations
Change: New article.
vMX Setup Guide for Microsoft Azure
vMX Setup Guide for Amazon Web Services (AWS)
Change: General refresh
Billing for Wireless Access
Change: Clarified that bandwidth limits apply per client.
Frequently Asked Questions Regarding Cisco Meraki Antennas
Change: General refresh
Port Profiles
Change: Clarified link agg functionality
Link Aggregation and Load Balancing
Change: Clarified link agg limits apply to same switch or physical stack.
Systems Manager Passcode Payload
Change: Removed Windows support.
MPLS Failover to Meraki Auto VPN
Change: Clarified that more specific AVPN route wins over static.
Dynamic DNS (DDNS)
Change: Clarified that DDNS names are tied to the network level and not the device.
Meraki Health Widget
Change: New article.
Configuring SAML SSO with Azure AD
Change: General refresh
vMX Setup Guide for Cisco UCM Cloud (UCMC)
Change: New article.