New MX250

alexi1
New here

New MX250

We just received our new MX250 and I need to assign a static IP address to one of the Internet ports. How do I do this?

4 REPLIES 4
KathleenJ
Meraki Employee

Hi,

 

You can configure a static IP via the local status page. Here is a link to the instructions on how to connect. https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Me...

If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.
UCcert
Kind of a big deal

Hi @alexi1 , you have two options:

 

1: use the dedicated management port. Connect via Ethernet to your machine.

 

2: use any of the LAN ports. Your machine will get an IP via dhcp.

 

The username you’ll need is the serial of the MX, no password required.

 

Enjoy

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
BlakeRichardson
Kind of a big deal

@alexi1 A good way to start is read the material provided in the box, 

Meraki CMNO, Ruckus WISE, Sonicwall CSSA, Allied Telesis CASE & CAI
KarstenI
Kind of a big deal

In addition to the already mentioned local status page, there is another way (IMHO much easier):

Connect the second WAN port to your internal Network where DHCP and internet is provided. After the device comes online in the dashboard, you can configure the first WAN-port.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels