MX with Meraki GO switches and AP's

Kal
Conversationalist

MX with Meraki GO switches and AP's

Are the MX gateways are compatible with Meraki GO MR110-48 switches, GR10 and GR60 AP's? Need to have 2nd WAN port for failover to secondary ISP.

4 REPLIES 4
alemabrahao
Kind of a big deal
Kind of a big deal

Do you want to have a 2nd WAN on MX correct? You can connect MX on any switch that you want, and It will work without problem.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
Kal
Conversationalist

Thank you. I don't see where I can convert LAN1 into a WAN port on the GX20 like I can on the MX units. Just wanted to make sure the MX will work with the other Meraki GO equipment.

alemabrahao
Kind of a big deal
Kind of a big deal

Sorry, I thought you were talking about the MX. The GX20 has only one WAN port.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
cmr
Kind of a big deal
Kind of a big deal

@Kal the MX will work with the Meraki Go equipment, but you'll have two different dashboards and I believe you'll need to use different email addresses with each.  It's sort of like using Meraki Go with a Sophos firewall, everything works, but the two are managed independently.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.