remote syslog and snmp traps

SOLVED
oldshield
New here

remote syslog and snmp traps

from the Meraki dashboard tool. i see there is an option for adding a syslog server.

 

IS there an option to send snmp traps also? Where is that configured?

 

Is there a way to do this globally or do i have to do this per device?

1 ACCEPTED SOLUTION
jdsilva
Kind of a big deal

https://documentation.meraki.com/zGeneral_Administration/Monitoring_and_Reporting/SNMP_Overview_and_...

 

You need to call support and get them to enable it. You configure it globally on the Network-wide > Alerts page (visible after it's been enabled). It cannot be configured per-device. 

View solution in original post

1 REPLY 1
jdsilva
Kind of a big deal

https://documentation.meraki.com/zGeneral_Administration/Monitoring_and_Reporting/SNMP_Overview_and_...

 

You need to call support and get them to enable it. You configure it globally on the Network-wide > Alerts page (visible after it's been enabled). It cannot be configured per-device. 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.