Cluster MX100 reboot master

SOLVED
sjimenezcl
New here

Cluster MX100 reboot master

Hey you meraki members!

 

Just wondering if there is a possibility of reload only the Master from the MX100 cluster that I've got in production, I did my research and I did only get the typical reboot option in the dashboard and that will reload the whole cluster.

 

Hope you could guide me 🙂

 

Thanks.

 

1 ACCEPTED SOLUTION
Ryan_Miles
Meraki Employee

Rebooting the primary does not reboot the spare. The spare would become master upon rebooting the primary.

View solution in original post

3 REPLIES 3
Ryan_Miles
Meraki Employee

Rebooting the primary does not reboot the spare. The spare would become master upon rebooting the primary.

The spare becomes the master while the primary is rebooting, but it takes over as master again when it has finished rebooting.

 

Can be annoying for some things like client VPN.  Users get disconnected on the primary reboot.  If they then reconnect again, they connect to the spare but then get disconnected again once the primary has finished rebooting.

ww
Kind of a big deal
Kind of a big deal

Also if you use a vip?

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.