cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

monitor VPN using SNMP?

Conversationalist

monitor VPN using SNMP?

Is is possible to monitor the status of a VPN configured on a Meraki device using SNMP?  If so, could anyone point to any useful resources, I found some snmp overview / configuration documents but nothing covers the VPN section

 

Thanks in advance

4 REPLIES 4
Meraki Employee

Re: monitor VPN using SNMP?

Dashboard does have a native notification alert for VPN connectivity status changes (Network Wide > Configure > Alerts) any time a site-to-site VPN link goes down or back up.  You should be able to get at this info via SNMP.  Check here https://sourceforge.net/p/netdisco/mibs/ci/55fcb1db6c981dacd2ce3bc6a71143fec0149afb/tree/meraki/MERA... I haven't tried it myself but have a look at vpnConnectivityChange and vpnFailoverDetected.

Kind of a big deal

Re: monitor VPN using SNMP?

Meraki and SNMP are only for sadists.  Don't go there unless you enjoy pain.

Kind of a big deal

Re: monitor VPN using SNMP?

Make that a masochist.

Conversationalist

Re: monitor VPN using SNMP?

Thank you, I'll take a look

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels