How do you enroll an iOS device into DEP?

Solved
jamie1972
New here

How do you enroll an iOS device into DEP?

Trying to enroll via DEP my devices to have them “supervised” but can’t seem to make the Assigned status tu pushed. Any help would be appreciated
1 Accepted Solution
Wolfe
Meraki Employee
Meraki Employee

It's worth noting that DEP settings for iOS devices are only applied at time of activation. An iOS device would have to be either new or erased/wiped then (re)activated for the settings to be applied.

 

There's a Meraki documentation article about DEP, with a couple videos that help walk through the process both on the Dashboard and on an iOS device.

View solution in original post

1 Reply 1
Wolfe
Meraki Employee
Meraki Employee

It's worth noting that DEP settings for iOS devices are only applied at time of activation. An iOS device would have to be either new or erased/wiped then (re)activated for the settings to be applied.

 

There's a Meraki documentation article about DEP, with a couple videos that help walk through the process both on the Dashboard and on an iOS device.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels