Feature Request: Network Groups for Administrator Privileges

Solved
RoboTech
Getting noticed

Feature Request: Network Groups for Administrator Privileges

Our setup consists of over 100 networks and 30 Admins that require access to different groups of networks. Giving everyone organizations access is not an option. Managing staff changes is a painfully manual process of adding dozens of networks to each administrator.

 

I am requesting the ability to group networks under Organization > Administrators, and then assign admin privileges to these groups.

1 Accepted Solution
RoboTech
Getting noticed

Recently I stumbled across a solution... Administrator Groups! Actually it was Network Tags but they function the same. Here's how to set it up...

 

Create Network Tag:

Go to Network > View all networks

Check all Networks to be included in a group

Click Tag, enter new network tag, click Add option

Click Add

 

Assign Network Tag to Administrators:

Go to Organization > Administrators

Select the Administrator to be given group access

Click Add access privileges 

Select the new network tag from the list

Select the permissions level from the drop down menu

Click Update Admin

Repeat for each additional Administrator

 

 

 

View solution in original post

4 Replies 4
ww
Kind of a big deal
Kind of a big deal

you can move to using saml

RoboTech
Getting noticed

Will I that allow me to create a few Administrator roles, each having privileges for different groups of networks?
RoboTech
Getting noticed

Recently I stumbled across a solution... Administrator Groups! Actually it was Network Tags but they function the same. Here's how to set it up...

 

Create Network Tag:

Go to Network > View all networks

Check all Networks to be included in a group

Click Tag, enter new network tag, click Add option

Click Add

 

Assign Network Tag to Administrators:

Go to Organization > Administrators

Select the Administrator to be given group access

Click Add access privileges 

Select the new network tag from the list

Select the permissions level from the drop down menu

Click Update Admin

Repeat for each additional Administrator

 

 

 

Hi

I have just changed some of the network tags to get a better overview.

then I wanted to correct the setting for admins but keep running into this error messages.

 

John_R_Gudmann_0-1584283009230.png

It uses to be straight forward but not this time.

 

Any idea or shall I raise a case?

Thanks.

John Gudmann

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels