Documentation Feedback: Layer 3 vs Layer 2 Switching

MerakiCommunity
Community Manager

Documentation Feedback: Layer 3 vs Layer 2 Switching

This is the community thread for feedback and questions on the documentation article Layer 3 vs Layer 2 Switching.

2 REPLIES 2
MerakiCommunity
Community Manager

Please tell us your thoughts about this documentation article! Do you need any clarifications? Have questions? Think it's great?

 

Note that your comments will be public here on this documentation page and also on the Meraki Community Documentation Feedback board.

cmr
Kind of a big deal
Kind of a big deal

Pretty good though the English could be slightly clearer in the first few paragraphs:

 

  • Here, PC A wants to send traffic to PC B at IP address 192.168.1.6. - I'd insert 'at IP address 192.168.1.5' after 'PC A'.  I'm also not sure if 'Here, ' adds anything.

 

  • Within a layer 2 switch environment exists a broadcast domain.  - a comma and the word 'there' should be inserted after 'environment'

 

It might also be worth mentioning that L3 routing can be done by an MX at the end of the article?

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.