Meraki

Nasser-ps · ‎Feb 18 2024

Hi Folks, I try to find Meraki AP with frame rate of 2.7 Gbps*, with up to 2,402 Mbps in the 2.4 GHz (roughly) band and 287 Mbps* in the 5 GHz (roughly) For MR44 and based on the datasheet it supports: “frame rate of 2.7 Gbps*, with up to 2,402 Mbps in the 5 GHz band and 287 Mbps* in the 2.4 GHz” the dual–radio aggregate frame rate is 2.7 Gbps, so does that mean the 2.4 GHz radio can support up to 287 Mbps ONLY? Is it possible that the 2.4 GHz operate up to 2.7 Gbps (if I don't use the 5 GHz radio)? What is the technical issue I may face if I recommended MR44 in this case? If I recommended MR44 , is it an add value or not - based on my needs?

Nasser-ps · ‎Oct 10 2023

Hey @DarrenOC, I did that, and a new row appeared to my dashboard that the new admin was added successfully, but its account is unverified. Also, I've checked the junk folder but there is nothing!!

Nasser-ps · ‎Oct 10 2023

Hey @Ale I've already done this step, but the external admin is not receiving the verification email to proceed. What is the issue?

Nasser-ps · ‎Oct 10 2023

Simply visit Organizations>Administrators, then check the admin you wish to delete, then press delete button. Note: You should have full permission, otherwise you will not be able to see the Administration tab to proceed with deletion.

Nasser-ps · ‎Oct 10 2023

I already have a Meraki account and dashboard. I'm asking if it's possible to add an external admin with full permissions on a specific device. Clarification: Suppose the admin - who create the dashboard- belong to @Meraki.com domain, and I want to add an external admin belongs to @example.com domain to access a specific device for testing purposes. Is it possible to do that? Please advise! Thanks

Nasser-ps · ‎Jun 5 2023

Your help is appreciated. THANKS

Nasser-ps · ‎Jun 5 2023

Hey everyone, I was asked to prepare a full solution for a small enterprise. The solution should provide firewall and switch, with least price and minimum capabilities. I'm thinking of suggesting a Meraki firewall with CBS 250 switch. My concerns are: Can we have a solution like that (Meraki firewall with Cisco switch)? Regarding Meraki Firewall license, which features I lost if a license expired? Please advise and provide useful material if there. THANKS

Nasser-ps · ‎Apr 27 2023

I checked Firewall Rules, and did Firewall Test Failure, and I got that all MV cameras passed the test except the one which display "Cloud Stream Unavailable" message. Also, I checked that the new IP subnets -mentioned in the documentation- are added to the rules. Any advise? Thanks,

Nasser-ps · ‎Apr 27 2023

Hi all, I have an issue with a Meraki camera where it keeps displaying "Cloud Stream Unavailable" message. Also, at the config section from Network tap I got this message "Out of date (reverted to safe config)". What I did to troubleshoot: I did a ping to the camera, and it succeeded. I did reboot the device with no benefit! I checked the IPs and there is no conflict issue! I did visit Meraki Documentation, but I have not found much help! There could be missed point I forgot, please advice!

Nasser-ps · ‎Apr 13 2023

Hey Everyone, My Meraki camera is currently in the DORMANT condition. I am aware that a device in a DORMANT state is one that is not connected or has been offline for more than a week. I then conducted some troubleshooting and accessed to Meraki dashboard> cameras>The targeted camera>Network. I also observed the following: The camera is not connected to any switch, as indicated by Ethernet 1 on the left sidebar. I restart the camera, but nothing happens! I "pinged" the camera, but nothing happened. Is that evidence that the camera is actually disconnected, or might there be a different problem? Thanks

Nasser-ps · ‎Apr 3 2023

Hi All, Can a Meraki Camera support these features: Receive an alert email/Mobile phone once a motion is detected at specific time (i.e., after midnight). Set a custom retention time (i.e., for 150 days). Can a customer configure the camera with a public domain email? I appreciate your help!

Meraki

Community

About Nasser-ps

Nasser-ps

Community Record

Badges

MR44 fit my req. or not?

Re: Adding a Guest Admin to my dashboard

Re: Adding a Guest Admin to my dashboard

Re: How to delete a Dashboard admin?

Adding a Guest Admin to my dashboard

Re: Full Solution Firewall and Switches

Full Solution Firewall and Switches

Re: Cloud Stream Unavailable!!

Cloud Stream Unavailable!!

Meraki Camera is in DORMANT state - how to fix

Alert and Retention Time with Meraki Camera